SMT bedrijfspand

Producten > Medische producten > Spuitpistolen

SELECTA Cleaning Jet Pistol (Spray Gun Rinser)

 

 

SIMPLY INDISPENSABLE
IN THE CLINIC, LABORATORY,
OR MEDICAL PRACTICE

The Selecta Spray Gun is the ideal instrument for cleaning laboratory glassware, pipettes, syringes, catheters, cuvettes, endoscopes, cystoscopes, cannulae and a variety of other instruments and articles used in clinics, laboratories, and medicalpractices in other words, everywhere where highest cleanliness and hygiene are mandatory.

The Selecta Spray Gun uses either water or pressurized air this means the cleaning process is quick, efficient and inexpensive. The Selecta Spray Gun features a new type of internal flow control mechanism. It permits the smooth and simple adjustment of the water or air flow across the entire range of the trigger movement.
The desired maximum water or air flow can be set by using the small knurled screw located behind the trigger. It is then regulated via the trigger up to the set maximum value.

THE SELECTA SPRAY GUN WITH CONUS AND WITHOUT TUBING CONNECTOR

with metal tubing ...

tubing with PVC ... (Standard)

... with conus and tabletop rosette, 3/4“ connection mounted

THE PRACTICAL SELECTA TABLETOP ROSETTE

The tabletop rosette, a threaded hollow
cylinder, facilitates the installation
of the Selecta Spray Gun in the sink
or a countertop. The spray gun is then
within easy reach. The tubing with the
respective connector to the water
or air supply is stored away underneath
the counter or sink, thus keeping the
work area clutter-free.

A SET OF ATTACHMENTS THAT MEETS EVERY NEED

Rinsing, suction or drying in every area of application is made possible through the set of 8 attachments. The standard set of 8 attachments is delivered on a stable storage rack for mounting on the wall. All attachments are kept within easy reach.

EASY TO USE

The Selecta Spray Gun features a new type of internal flow control mechanism. It permits the smooth and simple adjustment of the water or air flow across the entire range of the trigger movement. The desired maximum flow can be set by using the small knurled screw located behind the trigger. It is then regulated via the trigger up to the set maximum value.

   

All attachments are connected to the spray gun by seating them on the safety cone located at the spray gun tip. Even high pressure cannot disconnect them. The gun grip is heatinsulated.

The Selecta Spray Gun can be ready for operation very quickly:

1. The storage rack with the attachments is fastened to a wall near the sink or work area.
2. The tubing is connected to the tap with an threaded connector. If the spray gun is to be operated with compressed air, the tubing must be connected to the air supply by means of a suitable connector.

 

DEALER VAN:

Ateco DE LAMA Stilmas SMEG JOENI ELRO Elma GF HAMO Penntech Pierre Guerin